DescriptionWacker Neuson Four-cycle Benzine Rammer BS60-4sOperating dataBS 60-4sOperating weight kg71Ramming shoe size (WxL) (mm)280 x 336L x W x H mm673 x 343 x 965Stroke at the ramming shoe (mm)68Percussion rate max. blows/min680Operating speed Travel Speed m/min8.5Surface capacity Compaction m²/h143Solids diameter25.4 mmEngine MotorBS 60-4sEngine / Motor typeWM 100Engine / Motor manufacturerWacker NeusonEngine / Motorair-cooled single-cylinder four-cycle gasoline engineDisplacement cm³97Operating performance Max rated power – SAE J1995 kW2.4at rpm rpm4,200Fuel consumption l/h1.2Tank capacity (fuel) l3BS50-2 BS60-2 – Two-cycle rammerswacker neuson rammer 2 strokewacker neuson rammer 2 strokeWacker Neuson rammers have long been accepted as the standard setters in the construction industry. They have been developed for maximum productivity, performance and durability. They are powered by the exclusive WM 80 engine, designed and built by Wacker Neuson. Thanks to its catalytic converter the emissions fall significantly below the air emission standards. Automatic shutoff feature will shut down the engine if left idling for 10 minutes, providing additional fuel and emission savings.Easy start-up: Reliable starting in idle with automatic choke thanks to the vented carburetor.Strong performance: High percussion rate, powerful stroke, high stroke energy, fast advance travelThree-stage air filtration system with cyclone prefilter: High capacity, long durability, easy maintenance accessCompact design offers easy operation, especially in trenchesTypical for a two stroker: Fully functional at every angle The Wacker Neuson 4-stroke slab is compact and high performance. Designed for compacting clay, clay and granite clay. In limited spaceOperating dataBS50-2BS60-2Operating weight kg5866Ramming shoe size (WxL) (mm)250 x 330280 x 330L x W x H mm673 x 343 x 940673 x 343 x 965Stroke at the ramming shoe (mm)64.380Percussion rate max. blows/min700700Operating speed Travel Speed m/min9.59.8Surface capacity Compaction m²/h142.5164.6Engine MotorBS50-2BS60-2Engine / Motor typeWM 80WM 80Engine / Motor manufacturerWacker NeusonWacker NeusonEngine / Motorair-cooled single-cylinder two-cycle gasoline engineair-cooled single-cylinder two-cycle gasoline engineDisplacement cm³8080Gasoline / oil mixture 100:1100:1at rpm rpm4,4004,400Fuel consumption l/h11.2Tank capacity (fuel) l33CO2 (NRSC) ** g/kWh 1,113 1,113*Ramming shoes available in a range of widths.**Determined value of the CO2 emission during engine certification without consideration of the application on the machine.DS70 – The expert for extreme compaction jobswacker neuson diesel rammerWacker Neuson’s diesel rammer completes your diesel fleet. The DS70 is a well-balanced machine with low CO emissions and compact dimensions. It is ideally suited for the compaction of cohesive, mixed and granular soils.The diesel engine is the most environmentally friendly rammer engine available, which makes it the perfect choice for compaction jobs in poorly ventilated trenches.The noise reducing cover lowers the amount of engine and shoe noise transmitted to the operator.The large capacity and corrosion-proof fuel tank is equipped with a self cleaning in-tank filter. That means long service life and minimum maintenance.For added operator convenience, a single lever controls start-up, speed and engine shut-off.The highly engineered built-in shock mount system of the guide handle reduces hand-arm vibration (HAV) and thus improves user comfort. Operating dataDS70Operating weight kg83Ramming shoe size (WxL) (mm)330 x 340 mmL x W x H mm740 x 370 x 1000 mm Stroke at the ramming shoe (mm)75Percussion rate max. blows/min667 blows/minOperating speed Travel Speed m/min8.8 m/min Surface capacity Compaction m²/h174 m²/hCentrifugal force21 kNEngine MotorDS70Engine / Motor typeL 48Engine / Motor manufacturerYanmarEngine / Motorair-cooled single-cylinder diesel engineDisplacement cm³ 211 cm³Operating performance (SAE J1349)2.8 kWat rpm rpm3,450 rpmFuel consumption l/h0.9 l/hTank capacity (fuel) l 4.2 lAS50e – Battery rammerwacker neuson battery rammerBoth the environment and the operator are protected during compaction work with the battery-powered rammer AS50e. Due to the entirely emission-free working principle, work can easily be carried out in poorly ventilated trench applications or in sensitive vicinities. Thanks to a parallel guidance specifically developed for the rammer, the entire handle area of the battery-powered rammer AS50e is vibration-decoupled with low hand-arm vibrations (HAV) for the operator.100% emission-free work55% lower operating costs than with gasoline vibratory rammersSame compaction performance as comparable gasoline-powered rammersLow hand-arm vibrations (HAV) thanks to the parallel guidance of the handleMaintenance-free electric motor that is started at the push of a buttonOperating dataAS50eOperating weight (kg)70.4Weight without battery (WxL) (mm)61 kgRamming shoe size 280 x 340 mmLL x W x H mm610 x 361 x 1,050 mmP Percussion rate max. blows/min680 blows/minBattery run time0.5hRange per battery charge270 mImpact force16 kNEngine MotorAS50eEngine / Motor typeAsynchronous engineEngine / Motor manufacturerWacker NeusonRated performance2.1 kWRated current41 ARated voltage51 VBatteryAS50eType of batteryLi-IonWeight9.4 kgL x W x H220 x 290 x 194 mmEnergy content1,008 Wh
